The Export Control (Amendment) (No. 2) Regulations 2025
Write the words of this act the way you think they should read. Solon shows your change as a redline against the published text and pins it to that exact text, so it can never be applied to wording you did not see.
Change 1
7 Amendments to Category 1 - Special Materials and Related Equipment
(1) The section headed Category 1 - Special Materials and Related Equipment is amended as follows. (2) In the section headed 1B Test, Inspection and Production Equipment, in paragraph 2 of the Technical Notes to entry 1B228, for “contractor” substitute “contactor”. (3) In the section headed 1C Materials, after entry 1C450, insert— 1C513 | 'High-entropy alloy' or 'refractory metal and alloy' powders, not specified in 1C002, having a surface modified with 'inoculants'. Technical Notes: For the purposes of 1C513: 1. | 'High-entropy alloys' are alloys having at least 5 principal metallic elements, each having concentration within the range of 5 to 35 atomic percent, from the following list: Al, Ti, V, Cr, Mn, Fe, Co, Ni, Cu, Zr, Nb, Mo, Hf, Ta or W. 2. | 'Inoculants' are additives that promote grain nucleation and increase the total area of grain boundaries to inhibit solidification defects. 3. | ‘Refractory metals and alloys' are metals and alloys of niobium, molybdenum, tungsten and tantalum. .
7 Amendments to Category 1 - Special Materials and Related Equipment
(1) The section headed Category 1 - Special Materials and Related Equipment is amended as follows. (2) In the section headed 1B Test, Inspection and Production Equipment, in paragraph 2 of the Technical Notes to entry 1B228, for “contractor” substitute “contactor”. (3) In the section headed 1C Materials, after entry 1C450, insert— 1C513 | 'High-entropy alloy' or 'refractory metal and alloy' powders, not specified in 1C002, having a surface modified with 'inoculants'. Technical Notes: For the purposes of 1C513: 1. | 'High-entropy alloys' are alloys having at least 5 principal metallic elements, each having concentration within the range of 5 to 35 atomic percent, from the following list: Al, Ti, V, Cr, Mn, Fe, Co, Ni, Cu, Zr, Nb, Mo, Hf, Ta or W. 2. | 'Inoculants' are additives that promote grain nucleation and increase the total area of grain boundaries to inhibit solidification defects. 3. | ‘Refractory metals and alloys' are metals and alloys of niobium, molybdenum, tungsten and tantalum. .
One line that says what changes, such as "Halve the dog tax".
Who it helps, what it costs, what it fixes. It is what persuades people to support it.
A proposal here is not law. Support on Solon is evidence that people want the change; the official route says what it takes to make it law.
Sign in to file your proposal. What you have written stays on this page.
Sign in to file itThink it through
Ask what your change would do, who would gain and who would bear a cost, and where something like it is already law. The assistant reads your draft as it stands, cites the law and the studies it finds, and takes no side. What you file stays yours.