The Export Control (Amendment) Regulations 2026
Write the words of this act the way you think they should read. Solon shows your change as a redline against the published text and pins it to that exact text, so it can never be applied to wording you did not see.
Change 1
10 Amendments to Category 2 - Materials Processing
(1) The section headed Category 2 - Materials Processing is amended as follows. (2) In the section headed 2B Test, Inspection and Production Equipment— (a) in entry 2B001.b.4.a., for “TIR” substitute “Total Indicated Reading (TIR)”; (b) in entry 2B002.d.1., for “finishing” substitute “Finishing”; (c) in entry 2B002.d.2., for “finishing” substitute “Finishing”; (d) in entry 2B003.c., for “AGMA” substitute “American Gear Manufacturers Association (AGMA)”; (e) in entry 2B005, for “2E003.f.” substitute “2E301,”; (f) in entry 2B005.a., for “Chemical vapour deposition” substitute “Chemical Vapour Deposition”; (g) in entry 2B005.a.1.b., for “Controlled nucleation thermal deposition” substitute “Controlled Nucleation Thermal Deposition”; (h) in entry 2B005.c.,for “Electron beam physical vapour deposition” substitute “Electron Beam Physical Vapour Deposition”; (i) in the Note to entry 2B005, for “chemical vapour deposition” substitute “Chemical Vapour Deposition”; (j) in entry 2B201.c., after “ISO 230-2:1988” insert “or national equivalents”; (k) in entry 2B226, for “9B001 and 3B001” substitute “3B001 and 9B001”; (l) for the Note to entry 2B350, substitute— Note 1: For the purposes of 2B350, the materials used for gaskets, packing, seals, screws, washers or other materials performing a sealing function do not determine the status of control, provided that such components are designed to be interchangeable. Note 2: For the purposes of 2B350.a. to 2B350.i. and 2B350.k. the phrase “…where all surfaces that come in (or into) direct contact with the chemical(s) are made from…“ is understood to include all operations with the chemical(s), which are wetting the surfaces concerned: inter alia producing, processing, consuming, containing, storing, transferring, and/or conducting and controlling the flow. ; (m) in the Note to entry 2B352.d.1., for “reverse osmosis and hemodialysis equipment” substitute “equipment designed for reverse osmosis or for blood for medical applications (e.g. haemodialysis or plasmapheresis)”; (n) in entry 2B352.i.— (i) for “assemblers and synthesisers,” substitute “synthesisers or synthesisers and assemblies,”; (ii) for “1,5” substitute “0,5”; (iii) omit “with error rates less than 5 % in a single run”. (3) In the section headed 2E Technology— (a) in the Technical Note to the table (Deposition techniques) that appears after entry 2E301— (i) in the N.B.1. to paragraph a., for “controlled nucleation thermal deposition” substitute “Controlled Nucleation Thermal Deposition”; (ii) in paragraph b.1., for “Electron Beam PVD” substitute “Electron Beam-Physical Vapour Deposition (EB-PVD)”; (iii) in paragraph g., for “electron beam physical vapour deposition” substitute “Electron Beam-Physical Vapour Deposition (EB-PVD)”; (b) omit entry 2E503, including the Technical Note; (c) before the table (Deposition techniques) that appears after entry 2E301, insert— 2E503 | “Technology” as follows: g. | “Technology”, not specified elsewhere, for the “development” or “production” of ‘coating systems’ having all the following: 1. | Designed to protect ceramic “matrix” “composite” materials specified in 1C007 or 1C507 from corrosion; and 2. | Designed to operate at temperatures exceeding 1 373,15 K (1 100°C). Technical Note: For the purposes of 2E503.g.,‘coating systems’ consist of one or more layers (e.g., bond, interlayer, top coat) of material deposited on the substrate. .
10 Amendments to Category 2 - Materials Processing
(1) The section headed Category 2 - Materials Processing is amended as follows. (2) In the section headed 2B Test, Inspection and Production Equipment— (a) in entry 2B001.b.4.a., for “TIR” substitute “Total Indicated Reading (TIR)”; (b) in entry 2B002.d.1., for “finishing” substitute “Finishing”; (c) in entry 2B002.d.2., for “finishing” substitute “Finishing”; (d) in entry 2B003.c., for “AGMA” substitute “American Gear Manufacturers Association (AGMA)”; (e) in entry 2B005, for “2E003.f.” substitute “2E301,”; (f) in entry 2B005.a., for “Chemical vapour deposition” substitute “Chemical Vapour Deposition”; (g) in entry 2B005.a.1.b., for “Controlled nucleation thermal deposition” substitute “Controlled Nucleation Thermal Deposition”; (h) in entry 2B005.c.,for “Electron beam physical vapour deposition” substitute “Electron Beam Physical Vapour Deposition”; (i) in the Note to entry 2B005, for “chemical vapour deposition” substitute “Chemical Vapour Deposition”; (j) in entry 2B201.c., after “ISO 230-2:1988” insert “or national equivalents”; (k) in entry 2B226, for “9B001 and 3B001” substitute “3B001 and 9B001”; (l) for the Note to entry 2B350, substitute— Note 1: For the purposes of 2B350, the materials used for gaskets, packing, seals, screws, washers or other materials performing a sealing function do not determine the status of control, provided that such components are designed to be interchangeable. Note 2: For the purposes of 2B350.a. to 2B350.i. and 2B350.k. the phrase “…where all surfaces that come in (or into) direct contact with the chemical(s) are made from…“ is understood to include all operations with the chemical(s), which are wetting the surfaces concerned: inter alia producing, processing, consuming, containing, storing, transferring, and/or conducting and controlling the flow. ; (m) in the Note to entry 2B352.d.1., for “reverse osmosis and hemodialysis equipment” substitute “equipment designed for reverse osmosis or for blood for medical applications (e.g. haemodialysis or plasmapheresis)”; (n) in entry 2B352.i.— (i) for “assemblers and synthesisers,” substitute “synthesisers or synthesisers and assemblies,”; (ii) for “1,5” substitute “0,5”; (iii) omit “with error rates less than 5 % in a single run”. (3) In the section headed 2E Technology— (a) in the Technical Note to the table (Deposition techniques) that appears after entry 2E301— (i) in the N.B.1. to paragraph a., for “controlled nucleation thermal deposition” substitute “Controlled Nucleation Thermal Deposition”; (ii) in paragraph b.1., for “Electron Beam PVD” substitute “Electron Beam-Physical Vapour Deposition (EB-PVD)”; (iii) in paragraph g., for “electron beam physical vapour deposition” substitute “Electron Beam-Physical Vapour Deposition (EB-PVD)”; (b) omit entry 2E503, including the Technical Note; (c) before the table (Deposition techniques) that appears after entry 2E301, insert— 2E503 | “Technology” as follows: g. | “Technology”, not specified elsewhere, for the “development” or “production” of ‘coating systems’ having all the following: 1. | Designed to protect ceramic “matrix” “composite” materials specified in 1C007 or 1C507 from corrosion; and 2. | Designed to operate at temperatures exceeding 1 373,15 K (1 100°C). Technical Note: For the purposes of 2E503.g.,‘coating systems’ consist of one or more layers (e.g., bond, interlayer, top coat) of material deposited on the substrate. .
One line that says what changes, such as "Halve the dog tax".
Who it helps, what it costs, what it fixes. It is what persuades people to support it.
A proposal here is not law. Support on Solon is evidence that people want the change; the official route says what it takes to make it law.
Sign in to file your proposal. What you have written stays on this page.
Sign in to file itThink it through
Ask what your change would do, who would gain and who would bear a cost, and where something like it is already law. The assistant reads your draft as it stands, cites the law and the studies it finds, and takes no side. What you file stays yours.