The Export Control (Amendment) Regulations 2026
Write the words of this act the way you think they should read. Solon shows your change as a redline against the published text and pins it to that exact text, so it can never be applied to wording you did not see.
Change 1
9 Amendments to Category 1 - Special Materials and Related Equipment
(1) The section headed Category 1 - Special Materials and Related Equipment is amended as follows. (2) In the section headed 1A Systems, Equipment and Components— (a) in entry 1A001.a., for “50 %” substitute “50%”; (b) in entry 1A004.a.3., for “warfare” substitute “Warfare”; (c) for entry 1A004.a.4., substitute— 4 “Riot Control Agents” (“RCAs”); ; (d) in entry 1A004.b.3., for “warfare” substitute “Warfare”; (e) for entry 1A004.c.3., substitute— 3. Chemical Warfare (CW) agents. Note: 1A004.c. does not apply to detection systems limited to the detection of any of the following: a. Cyanogen chloride (CAS 506-77-4); b. Hydrocyanic acid (CAS 74-90-8); c. Chlorine (CAS 7782-50-5); d. Carbonyl chloride (phosgene) (CAS 75-44-5); e. Diphosgene (trichloromethyl-chloroformate) (CAS 503-38-8); f. Xylyl bromide, ortho: (CAS 89-92-9), meta: (CAS 620-13-3), para: (CAS 104-81-4); g. Benzyl bromide (CAS 100-39-0); h. Benzyl iodide (CAS 620-05-3); i. Bromo acetone (CAS 598-31-2); j. Cyanogen bromide (CAS 506-68-3); k. Bromo methylethylketone (CAS 816-40-0); l. Chloro acetone (CAS 78-95-5); m. Ethyl iodoacetate (CAS 623-48-3); n. Iodo acetone (CAS 3019-04-3); o. Chloropicrin (CAS 76-06-2). ; (f) in paragraph 1 of the Technical Notes to entry 1A004— (i) for “chemical warfare” substitute “Chemical Warfare (CW)”; (ii) for ““riot control agents”” substitute ““Riot Control Agents” (“RCAs”)”; (g) in entry 1A007.b.1., for “bridge” substitute “Bridge”; (h) in entry 1A007.b.2., for “bridge wire” substitute “Bridge Wire”; (i) in entry 1A007.b.4., for “foil initiators” substitute “Foil Initiators”. (3) In the section headed 1B Test, Inspection and Production Equipment— (a) in entry 1B001.d.2., for “chemical vapour deposition” substitute “Chemical Vapour Deposition (CVD)”; (b) in paragraph 1 of the Technical Notes to entry 1B001— (i) omit “axes control, under computer “program” direction,”; (ii) after “the positioning” insert “, under computer “program” direction,”; (c) after entry 1B235, insert— [1B501] | Equipment designed for the “production” of “composite” structures or laminates or “fibrous or filamentary materials”, as follows, and specially designed components and accessories therefore: d. Equipment specially designed or modified for the “production” of “fibrous or filamentary materials” specified in 1C010, as follows: 2. Equipment, not specified in 1B001.d.2., for the “production” of multiple parallel silicon carbide fibres by ‘“laser”-driven Chemical Vapour Deposition (CVD)’. Technical Note: For the purposes of 1B501.d.2., ‘“laser”-driven CVD’ uses a “laser” as the energy source, resulting in the fibre’s unsupported growth. [1B504] | Additive manufacturing equipment designed or modified to produce explosive, pyrotechnic or propellant devices or shapes from “energetic materials”, and having one or more ultrasonic extruders or nozzles. . (4) In the section headed 1C Materials— (a) for entry 1C007.c.1.a., substitute— a. | Continuous fibres having all of the following: 1. | being made from any of the following materials: a. | Al2O3 (CAS 1344-28-1); or b. | Si-C-N; and 2. | Having all of the following: a. | Tensile strength equal to or greater than 700 MPa at 1 273 K (1 000°C); and b. | Tensile creep resistance equal to or less than 1% creep strain at 100 MPa load 1 273 K (1 000℃) for 100 hours. ; (b) in entry 1C007.c.1.b.— (i) for “being” substitute “having”; (ii) in entry 1C007.c.1.b.1, for “Made” substitute “Being made”; (c) in entry 1C007.e., for “1C007.c.,” substitute “1C007.c. or 1C507.c.,”; (d) after entry 1C350.90., on a new line insert— 91. 1,1,3,3-Tetraethylguanidine (CAS 13439-87-7). ; (e) after entry 1C450, insert— [1C507] | Ceramic powders, ceramic-“matrix” “composite” materials and ‘precursor materials’, as follows: c. Ceramic-“matrix” “composite” materials as follows: 1. Ceramic-ceramic “composite” materials with a glass or oxide-“matrix” and reinforced with: a. Continuous fibres, not specified in 1C007.c.1.a., having all of the following: 1. Being made from any of the following Al2O3-based materials or a combination thereof: a. Al2O3; or b. Mullite (3Al2O3.2SiO 2); and 2. Having all of the following: a. Tensile strength equal to or greater than 700 MPa at 1 273 K (1 000 °C); and b. Tensile creep resistance equal to or less than 1% creep strain at 100 MPa load and 1 273 K (1 000 °C) for 100 hours. . (5) In the section headed 1E Technology, in entry 1E002.f., for “or 1C007.c.;” substitute “, 1C007.c. or 1C507.c.;”
9 Amendments to Category 1 - Special Materials and Related Equipment
(1) The section headed Category 1 - Special Materials and Related Equipment is amended as follows. (2) In the section headed 1A Systems, Equipment and Components— (a) in entry 1A001.a., for “50 %” substitute “50%”; (b) in entry 1A004.a.3., for “warfare” substitute “Warfare”; (c) for entry 1A004.a.4., substitute— 4 “Riot Control Agents” (“RCAs”); ; (d) in entry 1A004.b.3., for “warfare” substitute “Warfare”; (e) for entry 1A004.c.3., substitute— 3. Chemical Warfare (CW) agents. Note: 1A004.c. does not apply to detection systems limited to the detection of any of the following: a. Cyanogen chloride (CAS 506-77-4); b. Hydrocyanic acid (CAS 74-90-8); c. Chlorine (CAS 7782-50-5); d. Carbonyl chloride (phosgene) (CAS 75-44-5); e. Diphosgene (trichloromethyl-chloroformate) (CAS 503-38-8); f. Xylyl bromide, ortho: (CAS 89-92-9), meta: (CAS 620-13-3), para: (CAS 104-81-4); g. Benzyl bromide (CAS 100-39-0); h. Benzyl iodide (CAS 620-05-3); i. Bromo acetone (CAS 598-31-2); j. Cyanogen bromide (CAS 506-68-3); k. Bromo methylethylketone (CAS 816-40-0); l. Chloro acetone (CAS 78-95-5); m. Ethyl iodoacetate (CAS 623-48-3); n. Iodo acetone (CAS 3019-04-3); o. Chloropicrin (CAS 76-06-2). ; (f) in paragraph 1 of the Technical Notes to entry 1A004— (i) for “chemical warfare” substitute “Chemical Warfare (CW)”; (ii) for ““riot control agents”” substitute ““Riot Control Agents” (“RCAs”)”; (g) in entry 1A007.b.1., for “bridge” substitute “Bridge”; (h) in entry 1A007.b.2., for “bridge wire” substitute “Bridge Wire”; (i) in entry 1A007.b.4., for “foil initiators” substitute “Foil Initiators”. (3) In the section headed 1B Test, Inspection and Production Equipment— (a) in entry 1B001.d.2., for “chemical vapour deposition” substitute “Chemical Vapour Deposition (CVD)”; (b) in paragraph 1 of the Technical Notes to entry 1B001— (i) omit “axes control, under computer “program” direction,”; (ii) after “the positioning” insert “, under computer “program” direction,”; (c) after entry 1B235, insert— [1B501] | Equipment designed for the “production” of “composite” structures or laminates or “fibrous or filamentary materials”, as follows, and specially designed components and accessories therefore: d. Equipment specially designed or modified for the “production” of “fibrous or filamentary materials” specified in 1C010, as follows: 2. Equipment, not specified in 1B001.d.2., for the “production” of multiple parallel silicon carbide fibres by ‘“laser”-driven Chemical Vapour Deposition (CVD)’. Technical Note: For the purposes of 1B501.d.2., ‘“laser”-driven CVD’ uses a “laser” as the energy source, resulting in the fibre’s unsupported growth. [1B504] | Additive manufacturing equipment designed or modified to produce explosive, pyrotechnic or propellant devices or shapes from “energetic materials”, and having one or more ultrasonic extruders or nozzles. . (4) In the section headed 1C Materials— (a) for entry 1C007.c.1.a., substitute— a. | Continuous fibres having all of the following: 1. | being made from any of the following materials: a. | Al2O3 (CAS 1344-28-1); or b. | Si-C-N; and 2. | Having all of the following: a. | Tensile strength equal to or greater than 700 MPa at 1 273 K (1 000°C); and b. | Tensile creep resistance equal to or less than 1% creep strain at 100 MPa load 1 273 K (1 000℃) for 100 hours. ; (b) in entry 1C007.c.1.b.— (i) for “being” substitute “having”; (ii) in entry 1C007.c.1.b.1, for “Made” substitute “Being made”; (c) in entry 1C007.e., for “1C007.c.,” substitute “1C007.c. or 1C507.c.,”; (d) after entry 1C350.90., on a new line insert— 91. 1,1,3,3-Tetraethylguanidine (CAS 13439-87-7). ; (e) after entry 1C450, insert— [1C507] | Ceramic powders, ceramic-“matrix” “composite” materials and ‘precursor materials’, as follows: c. Ceramic-“matrix” “composite” materials as follows: 1. Ceramic-ceramic “composite” materials with a glass or oxide-“matrix” and reinforced with: a. Continuous fibres, not specified in 1C007.c.1.a., having all of the following: 1. Being made from any of the following Al2O3-based materials or a combination thereof: a. Al2O3; or b. Mullite (3Al2O3.2SiO 2); and 2. Having all of the following: a. Tensile strength equal to or greater than 700 MPa at 1 273 K (1 000 °C); and b. Tensile creep resistance equal to or less than 1% creep strain at 100 MPa load and 1 273 K (1 000 °C) for 100 hours. . (5) In the section headed 1E Technology, in entry 1E002.f., for “or 1C007.c.;” substitute “, 1C007.c. or 1C507.c.;”
One line that says what changes, such as "Halve the dog tax".
Who it helps, what it costs, what it fixes. It is what persuades people to support it.
A proposal here is not law. Support on Solon is evidence that people want the change; the official route says what it takes to make it law.
Sign in to file your proposal. What you have written stays on this page.
Sign in to file itThink it through
Ask what your change would do, who would gain and who would bear a cost, and where something like it is already law. The assistant reads your draft as it stands, cites the law and the studies it finds, and takes no side. What you file stays yours.