The Export Control (Amendment) Regulations 2025
Write the words of this act the way you think they should read. Solon shows your change as a redline against the published text and pins it to that exact text, so it can never be applied to wording you did not see.
Change 1
17 Amendments to Category 9 - Aerospace and Propulsion
(1) The section headed Category 9 - Aerospace and Propulsion is amended as follows. (2) In the section headed 9A Systems, Equipment and Components— (a) in entry 9A001.a., after “9E003.i.” omit “;”; (b) in entry 9A004— (i) for “payloads” substitute “mission equipment”; (ii) after entry 9A004.b., insert— N.B. | For “sub-orbital craft”, see 9A004.h. ; (iii) in entry 9A004.d., for “payloads” substitute “mission equipment”; (iv) for entry 9A004.e.1. to entry 9A004.e.3. substitute— 1. | Command and telemetry data handling; Note: | 9A004.e.1. includes bus data management, storage, and processing. 2. | Payload data handling; or Note: | 9A004.e.2. includes management, storage, and processing of “spacecraft mission equipment” data. 3. | Attitude and orbit control; Note: | 9A004.e.3. includes sensing and actuation to determine and control the position and orientation of a “spacecraft”. ; (c) in entry 9A007.e.— (i) for “‘strong mechanical bond’” substitute ““strong mechanical bond””; (ii) omit the Technical Note; (d) in entry 9A008.a., for “‘strong mechanical bond’” substitute ““strong mechanical bond””; (e) in the Technical Notes to entry 9A012.a.— (i) after the heading “Technical Notes:” on a new line insert “For the purposes of 9A012.a.:”; (ii) in paragraph 1, for “For the purposes of 9A012.a., ‘operator’” substitute “‘ Operator’”; (iii) in paragraph 2, for “For the purposes of 9A012.a., ‘endurance’” substitute “ ‘Endurance’”; (iv) in paragraph 3, for “For the purposes of 9A012.a., ‘natural” substitute “ ‘Natural”. (3) In the section headed 9B Test, Inspection and Production Equipment— (a) after the heading, on a new line insert— Note: | 9B includes test, inspection and production equipment applicable to aero, aero-derivative, industrial or marine gas turbine engines. ; (b) in entry 9B003 after “turbine” insert “engine”; (c) in entry 9B004— (i) for “solid state” substitute “solid-state”; (ii) for “turbines” substitute “turbine engines”. (4) In the section headed 9D Software— (a) in the N.B. to entry 9D005— (i) for “listed” substitute “specified”; (ii) for “payloads”” substitute “mission equipment””; (b) in entry 9D101, after “9B106,” insert “9B107,”. (5) In the section headed 9E Technology— (a) in entry 9E003, after “Other “technology” as follows:” insert— Note: | 9E003 includes technology applicable to aero, aero-derivative, marine or industrial gas turbine engines. ; (b) in entry 9E003.a.1., for “Gas turbine” substitute “Turbine”; (c) in entry 9E003.a.2.e., for “Utilisation of ‘pressure” substitute “‘Pressure”; (d) in the Technical Notes to entry 9E003.a.2.— (i) in paragraph 2, after “purposes of” insert “9E003.a.2.a. and”; (ii) in paragraph 3— (aa) after “9E003.a.2.e.,” omit “in”; (bb) after “‘pressure gain combustion’” insert “refers to a combustor where”; (e) in the N.B. to entry 9E003.a.2.— (i) for “See 9E003.e. for “technology” “required” for” substitute “For”; (ii) after “holes” insert “, see 9E003.c. for “technology” “required””; (f) in the Technical Note to entry 9E003.a.5., after “purposes of” insert “9E003.a.4. and”; (g) in entry 9E003.a.6., for “solid state” substitute “solid-state”; (h) in entry 9E003.a.8., after “tolerant’” omit “gas turbine engine”; (i) in the Technical Notes to entry 9E003.c.— (i) after the heading “Technical Notes:” on a new line insert “For the purposes of 9E003.c.:”; (ii) in paragraph 1, for “For the purposes of 9E003.c., the” substitute “The”; (iii) in paragraph 2, for “For the purposes of 9E003.c., ‘hole” substitute “‘Hole”; (iv) in paragraph 3, for “For the purposes of 9E003.c., ‘incidence” substitute “‘Incidence”; (v) in paragraph 4, for “For the purposes of 9E003.c., methods” substitute “Methods” and for “Electrical Discharge Machining (EDM)” substitute “electrical discharge machining”; (j) in the Technical Note to entry 9E003.e., for “widest” substitute “largest”; (k) in entry 9E003.i., after ““Technology” for” insert “gas turbine engine”; (l) in entry 9E003.i.3., for “stability.” substitute “stability;”; (m) in entry 9E003.k.— (i) in the N.B.1. for “See 9E003.h. for” substitute “For” and for “technology.” substitute “technology, see 9E003.h.”; (ii) in the N.B.2. for “See 9E003.i. for” substitute “For” and for “technology.” substitute “technology, see 9E003.i.”; (n) in entry 9E102, after “9B106,” insert “9B107,”.
17 Amendments to Category 9 - Aerospace and Propulsion
(1) The section headed Category 9 - Aerospace and Propulsion is amended as follows. (2) In the section headed 9A Systems, Equipment and Components— (a) in entry 9A001.a., after “9E003.i.” omit “;”; (b) in entry 9A004— (i) for “payloads” substitute “mission equipment”; (ii) after entry 9A004.b., insert— N.B. | For “sub-orbital craft”, see 9A004.h. ; (iii) in entry 9A004.d., for “payloads” substitute “mission equipment”; (iv) for entry 9A004.e.1. to entry 9A004.e.3. substitute— 1. | Command and telemetry data handling; Note: | 9A004.e.1. includes bus data management, storage, and processing. 2. | Payload data handling; or Note: | 9A004.e.2. includes management, storage, and processing of “spacecraft mission equipment” data. 3. | Attitude and orbit control; Note: | 9A004.e.3. includes sensing and actuation to determine and control the position and orientation of a “spacecraft”. ; (c) in entry 9A007.e.— (i) for “‘strong mechanical bond’” substitute ““strong mechanical bond””; (ii) omit the Technical Note; (d) in entry 9A008.a., for “‘strong mechanical bond’” substitute ““strong mechanical bond””; (e) in the Technical Notes to entry 9A012.a.— (i) after the heading “Technical Notes:” on a new line insert “For the purposes of 9A012.a.:”; (ii) in paragraph 1, for “For the purposes of 9A012.a., ‘operator’” substitute “‘ Operator’”; (iii) in paragraph 2, for “For the purposes of 9A012.a., ‘endurance’” substitute “ ‘Endurance’”; (iv) in paragraph 3, for “For the purposes of 9A012.a., ‘natural” substitute “ ‘Natural”. (3) In the section headed 9B Test, Inspection and Production Equipment— (a) after the heading, on a new line insert— Note: | 9B includes test, inspection and production equipment applicable to aero, aero-derivative, industrial or marine gas turbine engines. ; (b) in entry 9B003 after “turbine” insert “engine”; (c) in entry 9B004— (i) for “solid state” substitute “solid-state”; (ii) for “turbines” substitute “turbine engines”. (4) In the section headed 9D Software— (a) in the N.B. to entry 9D005— (i) for “listed” substitute “specified”; (ii) for “payloads”” substitute “mission equipment””; (b) in entry 9D101, after “9B106,” insert “9B107,”. (5) In the section headed 9E Technology— (a) in entry 9E003, after “Other “technology” as follows:” insert— Note: | 9E003 includes technology applicable to aero, aero-derivative, marine or industrial gas turbine engines. ; (b) in entry 9E003.a.1., for “Gas turbine” substitute “Turbine”; (c) in entry 9E003.a.2.e., for “Utilisation of ‘pressure” substitute “‘Pressure”; (d) in the Technical Notes to entry 9E003.a.2.— (i) in paragraph 2, after “purposes of” insert “9E003.a.2.a. and”; (ii) in paragraph 3— (aa) after “9E003.a.2.e.,” omit “in”; (bb) after “‘pressure gain combustion’” insert “refers to a combustor where”; (e) in the N.B. to entry 9E003.a.2.— (i) for “See 9E003.e. for “technology” “required” for” substitute “For”; (ii) after “holes” insert “, see 9E003.c. for “technology” “required””; (f) in the Technical Note to entry 9E003.a.5., after “purposes of” insert “9E003.a.4. and”; (g) in entry 9E003.a.6., for “solid state” substitute “solid-state”; (h) in entry 9E003.a.8., after “tolerant’” omit “gas turbine engine”; (i) in the Technical Notes to entry 9E003.c.— (i) after the heading “Technical Notes:” on a new line insert “For the purposes of 9E003.c.:”; (ii) in paragraph 1, for “For the purposes of 9E003.c., the” substitute “The”; (iii) in paragraph 2, for “For the purposes of 9E003.c., ‘hole” substitute “‘Hole”; (iv) in paragraph 3, for “For the purposes of 9E003.c., ‘incidence” substitute “‘Incidence”; (v) in paragraph 4, for “For the purposes of 9E003.c., methods” substitute “Methods” and for “Electrical Discharge Machining (EDM)” substitute “electrical discharge machining”; (j) in the Technical Note to entry 9E003.e., for “widest” substitute “largest”; (k) in entry 9E003.i., after ““Technology” for” insert “gas turbine engine”; (l) in entry 9E003.i.3., for “stability.” substitute “stability;”; (m) in entry 9E003.k.— (i) in the N.B.1. for “See 9E003.h. for” substitute “For” and for “technology.” substitute “technology, see 9E003.h.”; (ii) in the N.B.2. for “See 9E003.i. for” substitute “For” and for “technology.” substitute “technology, see 9E003.i.”; (n) in entry 9E102, after “9B106,” insert “9B107,”.
One line that says what changes, such as "Halve the dog tax".
Who it helps, what it costs, what it fixes. It is what persuades people to support it.
A proposal here is not law. Support on Solon is evidence that people want the change; the official route says what it takes to make it law.
Sign in to file your proposal. What you have written stays on this page.
Sign in to file itThink it through
Ask what your change would do, who would gain and who would bear a cost, and where something like it is already law. The assistant reads your draft as it stands, cites the law and the studies it finds, and takes no side. What you file stays yours.