The Product Safety and Metrology etc. (Amendment) Regulations 2024
Write the words of this act the way you think they should read. Solon shows your change as a redline against the published text and pins it to that exact text, so it can never be applied to wording you did not see.
Change 1
10 Amendment to the Pyrotechnic Articles (Safety) Regulations 2015
(1) The Pyrotechnic Articles (Safety) Regulations 2015 are amended as follows. (2) In regulation 2(1), in the definition of “the Directive” omit “(as it has effect immediately before IP completion day)”. (3) In regulation 38B(1)(b) omit “, as it has effect immediately before exit day”. (4) For regulation 38C(1)(a) substitute— (a) compiled in accordance with Annex II to Regulation No 1907/2006 of the European Parliament and of the Council of 18 December 2006 concerning the Registration, Evaluation, Authorisation and Restriction of Chemicals (REACH), establishing a European Chemicals Agency; . (5) For regulation 38E substitute— Further use of UK marking 38E (1) In this regulation— (a) any reference to an Article or an Annex is a reference to an Article of or an Annex to the Directive; (b) “harmonised standard” has the meaning given to it in Article 3(14). (2) Paragraph (3) applies where, before placing a pyrotechnic article on the market, the manufacturer ensures that— (a) the pyrotechnic article has been designed and manufactured in accordance with the essential safety requirements set out in Annex I; (b) the conformity assessment procedure that applies to that pyrotechnic article in accordance with Article 17 has been carried out; (c) the technical documentation referred to in Annex II has been drawn up; and (d) the technical documentation and other records relating to the conformity assessment procedure are prepared in or translated into English. (3) Where this paragraph applies— (a) the requirements of regulations 7 and 8 are to be treated as being satisfied; (b) except for regulations 41 and 42(1) to (2), Part 3 does not apply; (c) regulations 9, 10, 13, 14, 15(1)(a) and (b), 16, 19, 26, 29, 38(1) and 60 apply subject to the modifications in paragraph (4); (d) regulations 6 and 41 and Schedule 3A apply subject to the modifications in paragraphs (4) and (5). (4) The modifications referred to in paragraph (3)(c) and (d) are that— (a) any reference to the “essential safety requirements” is to be read as a reference to the essential safety requirements in Annex I; (b) any reference to “designated standard” is to be read as a reference to a harmonised standard; (c) any reference to “relevant conformity assessment procedure” is to be read as a reference to the conformity assessment procedure that applies to the pyrotechnic article in accordance with Article 17; (d) any reference to “technical documentation” is to be read as a reference to the technical documentation referred to in Annex II. (5) The modifications referred to in paragraph (3)(d) are that— (a) any reference to “approved body” is to be read as a reference to any conformity assessment body that undertook any conformity assessment procedure in accordance with Article 17; (b) any reference to “Schedule 2A” is to be read as a reference to Annex II; (c) in Schedule 3A the reference to “statutory requirements” is to be read as including the Directive. . (6) In regulation 74A, omit paragraphs (4) to (6).
10 Amendment to the Pyrotechnic Articles (Safety) Regulations 2015
(1) The Pyrotechnic Articles (Safety) Regulations 2015 are amended as follows. (2) In regulation 2(1), in the definition of “the Directive” omit “(as it has effect immediately before IP completion day)”. (3) In regulation 38B(1)(b) omit “, as it has effect immediately before exit day”. (4) For regulation 38C(1)(a) substitute— (a) compiled in accordance with Annex II to Regulation No 1907/2006 of the European Parliament and of the Council of 18 December 2006 concerning the Registration, Evaluation, Authorisation and Restriction of Chemicals (REACH), establishing a European Chemicals Agency; . (5) For regulation 38E substitute— Further use of UK marking 38E (1) In this regulation— (a) any reference to an Article or an Annex is a reference to an Article of or an Annex to the Directive; (b) “harmonised standard” has the meaning given to it in Article 3(14). (2) Paragraph (3) applies where, before placing a pyrotechnic article on the market, the manufacturer ensures that— (a) the pyrotechnic article has been designed and manufactured in accordance with the essential safety requirements set out in Annex I; (b) the conformity assessment procedure that applies to that pyrotechnic article in accordance with Article 17 has been carried out; (c) the technical documentation referred to in Annex II has been drawn up; and (d) the technical documentation and other records relating to the conformity assessment procedure are prepared in or translated into English. (3) Where this paragraph applies— (a) the requirements of regulations 7 and 8 are to be treated as being satisfied; (b) except for regulations 41 and 42(1) to (2), Part 3 does not apply; (c) regulations 9, 10, 13, 14, 15(1)(a) and (b), 16, 19, 26, 29, 38(1) and 60 apply subject to the modifications in paragraph (4); (d) regulations 6 and 41 and Schedule 3A apply subject to the modifications in paragraphs (4) and (5). (4) The modifications referred to in paragraph (3)(c) and (d) are that— (a) any reference to the “essential safety requirements” is to be read as a reference to the essential safety requirements in Annex I; (b) any reference to “designated standard” is to be read as a reference to a harmonised standard; (c) any reference to “relevant conformity assessment procedure” is to be read as a reference to the conformity assessment procedure that applies to the pyrotechnic article in accordance with Article 17; (d) any reference to “technical documentation” is to be read as a reference to the technical documentation referred to in Annex II. (5) The modifications referred to in paragraph (3)(d) are that— (a) any reference to “approved body” is to be read as a reference to any conformity assessment body that undertook any conformity assessment procedure in accordance with Article 17; (b) any reference to “Schedule 2A” is to be read as a reference to Annex II; (c) in Schedule 3A the reference to “statutory requirements” is to be read as including the Directive. . (6) In regulation 74A, omit paragraphs (4) to (6).
One line that says what changes, such as "Halve the dog tax".
Who it helps, what it costs, what it fixes. It is what persuades people to support it.
How this law is officially changed
Solon does not know this law's official route yet. The proposal is recorded all the same, and the route appears here once its source is added.
A proposal here is not law. Support on Solon is evidence that people want the change; the official route says what it takes to make it law.
Sign in to file your proposal. What you have written stays on this page.
Sign in to file itThink it through
Ask what your change would do, who would gain and who would bear a cost, and where something like it is already law. The assistant reads your draft as it stands, cites the law and the studies it finds, and takes no side. What you file stays yours.