The Product Safety and Metrology etc. (Amendment) Regulations 2024
Write the words of this act the way you think they should read. Solon shows your change as a redline against the published text and pins it to that exact text, so it can never be applied to wording you did not see.
Change 1
15 Amendment to the Pressure Equipment (Safety) Regulations 2016
(1) The Pressure Equipment (Safety) Regulations 2016are amended as follows. (2) In regulation 2(1), in the definition of “the Directive” omit “(as it has effect immediately before IP completion day)”. (3) For regulation 39C substitute— Further use of the UK marking 39C (1) In this regulation— (a) any reference to an Article or an Annex is a reference to an Article of or an Annex to the Directive; (b) “pressure equipment or assembly” means the pressure equipment or assembly referred to in Article 4(1) and (2); (c) “harmonised standard” has the meaning given in Article 2(24). (2) Paragraph (3) applies where, before placing pressure equipment or assembly on the market, the manufacturer— (a) ensures that the pressure equipment or assembly has been manufactured in accordance with the essential safety requirements set out in Annex I; (b) ensures that the relevant conformity assessment procedures that apply to that pressure equipment or assembly referred to in Article 14 have been carried out; (c) draws up the technical documentation referred to in Annex III; and (d) ensures that the technical documentation and other records and correspondence relating to the conformity assessment procedures are prepared in or translated into English. (3) Where this paragraph applies— (a) regulations 9(1) and 10 are to be treated as being satisfied; (b) except for regulations 48 and 49(1) to (5), Part 3 does not apply; (c) regulations 2(2)(a), 12, 15, 21(1)(a) and (b), 22, 25, 31, 32, 33 and 39 apply subject to the modifications in paragraph (4); (d) regulations 11, 14, 24, 48 and 49(2) and Schedule 11 are subject to the modifications in paragraphs (4) and (5). (4) The modifications referred to in paragraph (3)(c) and (d) are that— (a) any reference to “essential safety requirements” is to be read as a reference to the essential safety requirements set out in Annex I; (b) any reference to “designated standard” is to be read as a reference to a harmonised standard; (c) any reference to “conformity assessment procedure” is to be read as a reference to the relevant conformity assessment procedure referred to in Article 14; (d) any reference to “technical documentation” is to be read as a reference to the technical documentation referred to in Annex III; (e) any reference to “pressure equipment or an assembly referred to in regulation 6 or 7” is to be read as a reference to pressure equipment or assembly referred to in Article 4(1) or (2). (5) The modifications referred to in paragraph (3)(d) are that— (a) in regulation 11— (i) paragraph (1) is to be read as if sub-paragraph (c) were omitted; (ii) in paragraph (4) the reference to “enactment” is to be read as including the Directive; (b) in regulations 14 and 24 any reference to paragraphs 29 and 30 of Schedule 2 is to be read as a reference to paragraphs 3.3 and 3.4 of Annex I; (c) in regulation 48 the reference to “Schedule 1A to these Regulations” is to be read as a reference to Annex III; (d) in regulation 49(2)— (i) the reference to “regulation 42” is to be read as a reference to Article 14; (ii) the reference to “user inspectorate” is to be read as a reference to any body designated in accordance with Article 16; (e) in Schedule 11— (i) in paragraph 5 the reference to “statutory requirements” is to be read as including a reference to the Directive; (ii) paragraph 7 is to be read as requiring the manufacturer to include the details set out in paragraph 7 of Annex IV. . (4) In regulation 88A, omit paragraphs (4) to (6).
15 Amendment to the Pressure Equipment (Safety) Regulations 2016
(1) The Pressure Equipment (Safety) Regulations 2016are amended as follows. (2) In regulation 2(1), in the definition of “the Directive” omit “(as it has effect immediately before IP completion day)”. (3) For regulation 39C substitute— Further use of the UK marking 39C (1) In this regulation— (a) any reference to an Article or an Annex is a reference to an Article of or an Annex to the Directive; (b) “pressure equipment or assembly” means the pressure equipment or assembly referred to in Article 4(1) and (2); (c) “harmonised standard” has the meaning given in Article 2(24). (2) Paragraph (3) applies where, before placing pressure equipment or assembly on the market, the manufacturer— (a) ensures that the pressure equipment or assembly has been manufactured in accordance with the essential safety requirements set out in Annex I; (b) ensures that the relevant conformity assessment procedures that apply to that pressure equipment or assembly referred to in Article 14 have been carried out; (c) draws up the technical documentation referred to in Annex III; and (d) ensures that the technical documentation and other records and correspondence relating to the conformity assessment procedures are prepared in or translated into English. (3) Where this paragraph applies— (a) regulations 9(1) and 10 are to be treated as being satisfied; (b) except for regulations 48 and 49(1) to (5), Part 3 does not apply; (c) regulations 2(2)(a), 12, 15, 21(1)(a) and (b), 22, 25, 31, 32, 33 and 39 apply subject to the modifications in paragraph (4); (d) regulations 11, 14, 24, 48 and 49(2) and Schedule 11 are subject to the modifications in paragraphs (4) and (5). (4) The modifications referred to in paragraph (3)(c) and (d) are that— (a) any reference to “essential safety requirements” is to be read as a reference to the essential safety requirements set out in Annex I; (b) any reference to “designated standard” is to be read as a reference to a harmonised standard; (c) any reference to “conformity assessment procedure” is to be read as a reference to the relevant conformity assessment procedure referred to in Article 14; (d) any reference to “technical documentation” is to be read as a reference to the technical documentation referred to in Annex III; (e) any reference to “pressure equipment or an assembly referred to in regulation 6 or 7” is to be read as a reference to pressure equipment or assembly referred to in Article 4(1) or (2). (5) The modifications referred to in paragraph (3)(d) are that— (a) in regulation 11— (i) paragraph (1) is to be read as if sub-paragraph (c) were omitted; (ii) in paragraph (4) the reference to “enactment” is to be read as including the Directive; (b) in regulations 14 and 24 any reference to paragraphs 29 and 30 of Schedule 2 is to be read as a reference to paragraphs 3.3 and 3.4 of Annex I; (c) in regulation 48 the reference to “Schedule 1A to these Regulations” is to be read as a reference to Annex III; (d) in regulation 49(2)— (i) the reference to “regulation 42” is to be read as a reference to Article 14; (ii) the reference to “user inspectorate” is to be read as a reference to any body designated in accordance with Article 16; (e) in Schedule 11— (i) in paragraph 5 the reference to “statutory requirements” is to be read as including a reference to the Directive; (ii) paragraph 7 is to be read as requiring the manufacturer to include the details set out in paragraph 7 of Annex IV. . (4) In regulation 88A, omit paragraphs (4) to (6).
One line that says what changes, such as "Halve the dog tax".
Who it helps, what it costs, what it fixes. It is what persuades people to support it.
How this law is officially changed
Solon does not know this law's official route yet. The proposal is recorded all the same, and the route appears here once its source is added.
A proposal here is not law. Support on Solon is evidence that people want the change; the official route says what it takes to make it law.
Sign in to file your proposal. What you have written stays on this page.
Sign in to file itThink it through
Ask what your change would do, who would gain and who would bear a cost, and where something like it is already law. The assistant reads your draft as it stands, cites the law and the studies it finds, and takes no side. What you file stays yours.