The Product Safety and Metrology etc. (Amendment) Regulations 2024
Write the words of this act the way you think they should read. Solon shows your change as a redline against the published text and pins it to that exact text, so it can never be applied to wording you did not see.
Change 1
20 Amendment to the Radio Equipment Regulations 2017
(1) The Radio Equipment Regulations 2017 are amended as follows. (2) In regulation 2(1), for the definition of “the Directive” substitute— “the Directive” means Directive 2014/53/EU of the European Parliament and of the Council on the harmonisation of the laws of the Member States relating to the making available on the market of radio equipment; . (3) In regulation 36A(6) for “16” substitute “17”. (4) For regulation 36B substitute— Further use of UK marking 36B (1) In this regulation— (a) any reference to an Article or an Annex is a reference to an Article or an Annex of the Directive; (b) “harmonised standard” has the meaning given to it in Article 2(18). (2) Subject to paragraphs (4) and (5), paragraph (3) applies where, before placing radio equipment on the market, the manufacturer— (a) ensures that the radio equipment has been designed and manufactured in accordance with the essential requirements set out in Article 3; (b) ensures that the conformity assessment procedure that applies to that radio equipment in accordance with Article 17 has been carried out; (c) draws up the technical documentation in accordance with Article 21; and (d) ensures that the technical documentation and other records and correspondence relating to the conformity assessment procedure are prepared in or translated into English. (3) Where this paragraph applies— (a) regulations 7, 9 and 45 are to be treated as being satisfied; (b) except for regulations 42, 43 and 44(1) to (3), Part 3 does not apply; (c) regulations 2(2)(a), 11, 17, 20, 21(a) and (c), 22, 25, 28, 32, 33, 39, 42, 44 and 63 apply subject to the modifications in paragraph (6); (d) regulation 10 and Schedule 6 apply subject to the modifications in paragraphs (6) and (7); (e) Schedule 7 applies subject to the modification in paragraph (7). (4) This paragraph applies where there is no designated standard or part of a designated standard which corresponds exactly to a harmonised standard or part of a harmonised standard referred to in Article 17. (5) Where paragraph (4) applies, paragraph (2)(b) is to be treated as requiring the manufacturer, when assessing the compliance with the essential requirements set out in Article 3(2) and (3), to ensure either of the conformity assessment procedures set out in Article 17(4) is carried out. (6) The modifications referred to in paragraph (3)(c) and (d) are that— (a) any reference to the “essential requirements” is to be read as a reference to the essential requirements set out in Article 3; (b) any reference to “designated standard” is to be read as a reference to a harmonised standard; (c) any reference to “relevant conformity assessment procedure” is to be read as a reference to the conformity assessment procedure that applies to that radio equipment in accordance with Article 17; (d) any reference to “technical documentation” is to be read as a reference to the technical documentation referred to in Annex V. (7) The modifications referred to in paragraph (3)(d) and (e) are that— (a) in regulation 10 the references to “enactment” are to be read as including the Directive; (b) in Schedule 6 any reference to “approved body” is to be read as a reference to the conformity assessment body that undertook the relevant conformity assessment procedure in accordance with Article 17; (c) in Schedules 6 and 7 the references to “relevant statutory requirements” are to be read as including the Directive. . (5) In regulation 76A, omit paragraphs (4) to (6). (6) In paragraph 7 of Schedule 6 for “notified” substitute “approved”.
20 Amendment to the Radio Equipment Regulations 2017
(1) The Radio Equipment Regulations 2017 are amended as follows. (2) In regulation 2(1), for the definition of “the Directive” substitute— “the Directive” means Directive 2014/53/EU of the European Parliament and of the Council on the harmonisation of the laws of the Member States relating to the making available on the market of radio equipment; . (3) In regulation 36A(6) for “16” substitute “17”. (4) For regulation 36B substitute— Further use of UK marking 36B (1) In this regulation— (a) any reference to an Article or an Annex is a reference to an Article or an Annex of the Directive; (b) “harmonised standard” has the meaning given to it in Article 2(18). (2) Subject to paragraphs (4) and (5), paragraph (3) applies where, before placing radio equipment on the market, the manufacturer— (a) ensures that the radio equipment has been designed and manufactured in accordance with the essential requirements set out in Article 3; (b) ensures that the conformity assessment procedure that applies to that radio equipment in accordance with Article 17 has been carried out; (c) draws up the technical documentation in accordance with Article 21; and (d) ensures that the technical documentation and other records and correspondence relating to the conformity assessment procedure are prepared in or translated into English. (3) Where this paragraph applies— (a) regulations 7, 9 and 45 are to be treated as being satisfied; (b) except for regulations 42, 43 and 44(1) to (3), Part 3 does not apply; (c) regulations 2(2)(a), 11, 17, 20, 21(a) and (c), 22, 25, 28, 32, 33, 39, 42, 44 and 63 apply subject to the modifications in paragraph (6); (d) regulation 10 and Schedule 6 apply subject to the modifications in paragraphs (6) and (7); (e) Schedule 7 applies subject to the modification in paragraph (7). (4) This paragraph applies where there is no designated standard or part of a designated standard which corresponds exactly to a harmonised standard or part of a harmonised standard referred to in Article 17. (5) Where paragraph (4) applies, paragraph (2)(b) is to be treated as requiring the manufacturer, when assessing the compliance with the essential requirements set out in Article 3(2) and (3), to ensure either of the conformity assessment procedures set out in Article 17(4) is carried out. (6) The modifications referred to in paragraph (3)(c) and (d) are that— (a) any reference to the “essential requirements” is to be read as a reference to the essential requirements set out in Article 3; (b) any reference to “designated standard” is to be read as a reference to a harmonised standard; (c) any reference to “relevant conformity assessment procedure” is to be read as a reference to the conformity assessment procedure that applies to that radio equipment in accordance with Article 17; (d) any reference to “technical documentation” is to be read as a reference to the technical documentation referred to in Annex V. (7) The modifications referred to in paragraph (3)(d) and (e) are that— (a) in regulation 10 the references to “enactment” are to be read as including the Directive; (b) in Schedule 6 any reference to “approved body” is to be read as a reference to the conformity assessment body that undertook the relevant conformity assessment procedure in accordance with Article 17; (c) in Schedules 6 and 7 the references to “relevant statutory requirements” are to be read as including the Directive. . (5) In regulation 76A, omit paragraphs (4) to (6). (6) In paragraph 7 of Schedule 6 for “notified” substitute “approved”.
One line that says what changes, such as "Halve the dog tax".
Who it helps, what it costs, what it fixes. It is what persuades people to support it.
How this law is officially changed
Solon does not know this law's official route yet. The proposal is recorded all the same, and the route appears here once its source is added.
A proposal here is not law. Support on Solon is evidence that people want the change; the official route says what it takes to make it law.
Sign in to file your proposal. What you have written stays on this page.
Sign in to file itThink it through
Ask what your change would do, who would gain and who would bear a cost, and where something like it is already law. The assistant reads your draft as it stands, cites the law and the studies it finds, and takes no side. What you file stays yours.