The Product Safety and Metrology etc. (Amendment) Regulations 2024
Write the words of this act the way you think they should read. Solon shows your change as a redline against the published text and pins it to that exact text, so it can never be applied to wording you did not see.
Change 1
6 Amendment to the Ecodesign for Energy-Related Products Regulations 2010 and related legislation
(1) The Ecodesign for Energy-Related Products Regulations 2010 are amended as follows— (a) in regulation 2(1), in the definition of “the Directive” omit “as it had effect immediately before IP completion day”; (b) in regulation 20A, omit paragraphs (4A) and (4B); (c) omit regulation 20C. (2) Commission Regulation (EU) No. 813 of 2 August 2013 implementing Directive 2009/125/EC of the European Parliament and of the Council with regard to ecodesign requirements for space heaters and combination heaters is amended as follows— (a) for Article 4.3 substitute— 3.1. Subject to subparagraph 3, the conformity of series-produced boilers must be certified by— (a) examination of the efficiency of a boiler type in accordance with— (i) module B as described in Annex 3 to Directive 92/42/EEC, subject to the modifications in paragraph 4, where module B is undertaken by an approved body; or (ii) module B as described in Annex 3 to Directive 92/42/EEC, subject to the modifications in paragraph 3.2(a); and (b) a declaration of conformity to the approved type in accordance with— (i) module C, D or E as described in Annex 4 to Directive 92/42/EEC, subject to the modifications in paragraph 5, where any of those modules are undertaken by an approved body; or (ii) module C, D or E as described in Annex 4 to Directive 92/42/EEC, subject to the modifications in paragraph 3.2(b). 3.2. The modifications referred to in— (a) paragraph 3.1(a)(ii) are that paragraph 9 of Annex 3 to Directive 92/42/EEC is to be read as if— (i) for the first two references to “the Community” there were substituted “Great Britain”; (ii) for “Community market” there were substituted “the market of Great Britain”; (b) paragraph 3.1(b)(ii) are that Annex 4 to Directive 92/42/EEC is to be read as if— (i) in paragraph 1 of the description of “Module D: Product quality assurance”, for “the CE marking is accompanied by” there were substituted “the written declaration of conformity must include”; (ii) in paragraph 1 of the description of “Module E: Product quality assurance”, for “the CE marking must be accompanied by” there were substituted “the written declaration of conformity must include”; (iii) in all other places for “CE marking” there were substituted “UK marking”; (iv) any reference to “authorised representative” were a reference to an authorised representative within the meaning of regulation 2 of the Ecodesign for Energy-Related Products Regulations 2010; and (v) the reference in paragraph 3 of the description of “Module C: conformity to type” to “the Community market” were a reference to the market of Great Britain. 3.3. For boilers burning gaseous fuels, the procedures for assessing the conformity of their efficiency must be those used to assess conformity to the safety requirements laid down in Regulation (EU) 2016/426 of the European Parliament and of the Council of March 2016 on appliances burning gaseous fuels and repealing Directive 2009/142/EC. ; (b) in Article 4.4 for “3(a)” substitute “3.1(a)(i)”; (c) in Article 4.5 for “3(b)” substitute “3.1(b)(i)”.
6 Amendment to the Ecodesign for Energy-Related Products Regulations 2010 and related legislation
(1) The Ecodesign for Energy-Related Products Regulations 2010 are amended as follows— (a) in regulation 2(1), in the definition of “the Directive” omit “as it had effect immediately before IP completion day”; (b) in regulation 20A, omit paragraphs (4A) and (4B); (c) omit regulation 20C. (2) Commission Regulation (EU) No. 813 of 2 August 2013 implementing Directive 2009/125/EC of the European Parliament and of the Council with regard to ecodesign requirements for space heaters and combination heaters is amended as follows— (a) for Article 4.3 substitute— 3.1. Subject to subparagraph 3, the conformity of series-produced boilers must be certified by— (a) examination of the efficiency of a boiler type in accordance with— (i) module B as described in Annex 3 to Directive 92/42/EEC, subject to the modifications in paragraph 4, where module B is undertaken by an approved body; or (ii) module B as described in Annex 3 to Directive 92/42/EEC, subject to the modifications in paragraph 3.2(a); and (b) a declaration of conformity to the approved type in accordance with— (i) module C, D or E as described in Annex 4 to Directive 92/42/EEC, subject to the modifications in paragraph 5, where any of those modules are undertaken by an approved body; or (ii) module C, D or E as described in Annex 4 to Directive 92/42/EEC, subject to the modifications in paragraph 3.2(b). 3.2. The modifications referred to in— (a) paragraph 3.1(a)(ii) are that paragraph 9 of Annex 3 to Directive 92/42/EEC is to be read as if— (i) for the first two references to “the Community” there were substituted “Great Britain”; (ii) for “Community market” there were substituted “the market of Great Britain”; (b) paragraph 3.1(b)(ii) are that Annex 4 to Directive 92/42/EEC is to be read as if— (i) in paragraph 1 of the description of “Module D: Product quality assurance”, for “the CE marking is accompanied by” there were substituted “the written declaration of conformity must include”; (ii) in paragraph 1 of the description of “Module E: Product quality assurance”, for “the CE marking must be accompanied by” there were substituted “the written declaration of conformity must include”; (iii) in all other places for “CE marking” there were substituted “UK marking”; (iv) any reference to “authorised representative” were a reference to an authorised representative within the meaning of regulation 2 of the Ecodesign for Energy-Related Products Regulations 2010; and (v) the reference in paragraph 3 of the description of “Module C: conformity to type” to “the Community market” were a reference to the market of Great Britain. 3.3. For boilers burning gaseous fuels, the procedures for assessing the conformity of their efficiency must be those used to assess conformity to the safety requirements laid down in Regulation (EU) 2016/426 of the European Parliament and of the Council of March 2016 on appliances burning gaseous fuels and repealing Directive 2009/142/EC. ; (b) in Article 4.4 for “3(a)” substitute “3.1(a)(i)”; (c) in Article 4.5 for “3(b)” substitute “3.1(b)(i)”.
One line that says what changes, such as "Halve the dog tax".
Who it helps, what it costs, what it fixes. It is what persuades people to support it.
How this law is officially changed
Solon does not know this law's official route yet. The proposal is recorded all the same, and the route appears here once its source is added.
A proposal here is not law. Support on Solon is evidence that people want the change; the official route says what it takes to make it law.
Sign in to file your proposal. What you have written stays on this page.
Sign in to file itThink it through
Ask what your change would do, who would gain and who would bear a cost, and where something like it is already law. The assistant reads your draft as it stands, cites the law and the studies it finds, and takes no side. What you file stays yours.