The Product Safety and Metrology etc. (Amendment) Regulations 2024
Write the words of this act the way you think they should read. Solon shows your change as a redline against the published text and pins it to that exact text, so it can never be applied to wording you did not see.
Change 1
8 Amendment to the Restriction of the Use of Certain Hazardous Substances in Electrical and Electronic Equipment Regulations 2012
(1) The Restriction of the Use of Certain Hazardous Substances in Electrical and Electronic Equipment Regulations 2012 are amended as follows. (2) In regulation 2, for the definition of “the Directive” substitute— “the Directive” means Directive 2011/65/EU of the European Parliament and of the Council on the restriction of the use of certain hazardous substances in electrical and electronic equipment as read in accordance with regulation 2B; . (3) For regulation 34A substitute— Obligations which are met by complying with obligations in the Directive 34A (1) In this regulation— (a) any reference to an Article is a reference to an Article of the Directive; (b) “CE marking” has the meaning given to it in Article 3(15). (2) Paragraph (3) applies where, before placing EEE on the market, the manufacturer— (a) ensures the EEE has been designed and manufactured in accordance with the requirements set out in Articles 4 and 7; (b) ensures that the conformity assessment procedure that applies to the EEE in accordance with Article 7(b) has been carried out; (c) affixes a CE marking, in accordance with Articles 7(c) and 15(1) and (2); (d) draws up an EU declaration of conformity, in accordance with Article 13; and (e) ensures that the EU declaration of conformity is prepared in or translated into English. (3) Where this paragraph applies— (a) the requirements of regulations 12(1), 13 and 14(1) and (2) are satisfied in respect of that EEE; (b) regulation 14(3), (5) and (6) apply to that EEE subject to the modifications in paragraph (8). (4) Paragraph (5) applies where, before placing EEE on the market, the importer ensures that— (a) the conformity assessment procedure that applies to that EEE in accordance with Article 7(b) has been carried out; (b) the manufacturer has drawn up the technical documentation referred to in Article 7(b); and (c) the EEE bears the CE marking referred to in Article 7(c). (5) Where this paragraph applies, regulation 23(b) applies to that EEE subject to the modifications in paragraph (8). (6) Paragraph (7) applies where, before making EEE available on the market, a distributor ensures that the EEE bears the CE marking referred to in Article 7(c). (7) Where this paragraph applies, regulation 29(1)(a) applies to that EEE subject to the modifications in paragraph (8). (8) The modifications referred to in paragraphs (3)(b), (5) and (7) are that— (a) any reference to “declaration of conformity” is to be read as a reference to the EU declaration of conformity; (b) any reference to “technical documentation” is to be read as a reference to the technical documentation referred to in Article 7(b); (c) any reference to “UK marking” is to be read as a reference to the CE marking. (9) Nothing in this regulation is to be taken to affect the prohibition in regulation 3(1) on placing, or making available, EEE on the market containing the substances listed in Schedule A1, subject to any exemptions as listed in Table 1 or Table 2 of Schedule A2. (10) Where an exemption continues to apply by virtue of regulations 6(4), 7(3) or (4) or 10(4) of the Hazardous Substances and Packaging (Legislative Functions and Amendment) (EU Exit) Regulations 2020, Table 1 and Table 2 of Schedule A2 are to be read in accordance with those Regulations. . (4) For regulation 34B, substitute— Further use of the UK marking 34B (1) In this regulation— (a) any reference to an Article is a reference to an Article of the Directive; (b) “harmonised standard” has the meaning given to it in Article 3(13). (2) Paragraph (3) applies where, before placing EEE on the market, the manufacturer— (a) ensures the EEE has been designed and manufactured in accordance with the requirements set out in Articles 4 and 7; and (b) ensures that the conformity assessment procedure that applies to the EEE in accordance with Article 7(b) has been carried out. (3) Where this paragraph applies— (a) the requirements of regulation 12(1) are treated as being satisfied in respect of that EEE; (b) regulations 15 and 17(2) and paragraphs 25 and 26 of Schedule 1 and paragraph 6 of Schedule 1A apply to that EEE subject to the modifications in paragraph (6). (4) Paragraph (5) applies where, before placing EEE on the market, the importer ensures that— (a) the conformity assessment procedure that applies to that EEE in accordance with Article 7(b) has been carried out; (b) the manufacturer has drawn up the technical documentation referred to in Article 7(b). (5) Where this paragraph applies— (a) the requirements of regulation 23(b)(i) are treated as being satisfied in respect of that EEE; (b) regulation 27(1)(b) applies to that EEE subject to the modifications in paragraph (6). (6) The modifications referred to in paragraphs (3)(b) and (5)(b) are that— (a) any reference to “designated standard” is to be read as a reference to a harmonised standard; (b) any reference to “technical documentation” is to be read as a reference to the technical documentation referred to in Article 7(b). (7) Nothing in this regulation is to be taken to affect the prohibition in regulation 3(1) on placing, or making available, EEE on the market containing the substances listed in Schedule A1, subject to any exemptions as listed in Table 1 or Table 2 of Schedule A2. (8) Where an exemption continues to apply by virtue of regulations 6(4), 7(3) or (4) or 10(4) of the Hazardous Substances and Packaging (Legislative Functions and Amendment) (EU Exit) Regulations 2020, Table 1 and Table 2 of Schedule A2 are to be read in accordance with those Regulations. .
8 Amendment to the Restriction of the Use of Certain Hazardous Substances in Electrical and Electronic Equipment Regulations 2012
(1) The Restriction of the Use of Certain Hazardous Substances in Electrical and Electronic Equipment Regulations 2012 are amended as follows. (2) In regulation 2, for the definition of “the Directive” substitute— “the Directive” means Directive 2011/65/EU of the European Parliament and of the Council on the restriction of the use of certain hazardous substances in electrical and electronic equipment as read in accordance with regulation 2B; . (3) For regulation 34A substitute— Obligations which are met by complying with obligations in the Directive 34A (1) In this regulation— (a) any reference to an Article is a reference to an Article of the Directive; (b) “CE marking” has the meaning given to it in Article 3(15). (2) Paragraph (3) applies where, before placing EEE on the market, the manufacturer— (a) ensures the EEE has been designed and manufactured in accordance with the requirements set out in Articles 4 and 7; (b) ensures that the conformity assessment procedure that applies to the EEE in accordance with Article 7(b) has been carried out; (c) affixes a CE marking, in accordance with Articles 7(c) and 15(1) and (2); (d) draws up an EU declaration of conformity, in accordance with Article 13; and (e) ensures that the EU declaration of conformity is prepared in or translated into English. (3) Where this paragraph applies— (a) the requirements of regulations 12(1), 13 and 14(1) and (2) are satisfied in respect of that EEE; (b) regulation 14(3), (5) and (6) apply to that EEE subject to the modifications in paragraph (8). (4) Paragraph (5) applies where, before placing EEE on the market, the importer ensures that— (a) the conformity assessment procedure that applies to that EEE in accordance with Article 7(b) has been carried out; (b) the manufacturer has drawn up the technical documentation referred to in Article 7(b); and (c) the EEE bears the CE marking referred to in Article 7(c). (5) Where this paragraph applies, regulation 23(b) applies to that EEE subject to the modifications in paragraph (8). (6) Paragraph (7) applies where, before making EEE available on the market, a distributor ensures that the EEE bears the CE marking referred to in Article 7(c). (7) Where this paragraph applies, regulation 29(1)(a) applies to that EEE subject to the modifications in paragraph (8). (8) The modifications referred to in paragraphs (3)(b), (5) and (7) are that— (a) any reference to “declaration of conformity” is to be read as a reference to the EU declaration of conformity; (b) any reference to “technical documentation” is to be read as a reference to the technical documentation referred to in Article 7(b); (c) any reference to “UK marking” is to be read as a reference to the CE marking. (9) Nothing in this regulation is to be taken to affect the prohibition in regulation 3(1) on placing, or making available, EEE on the market containing the substances listed in Schedule A1, subject to any exemptions as listed in Table 1 or Table 2 of Schedule A2. (10) Where an exemption continues to apply by virtue of regulations 6(4), 7(3) or (4) or 10(4) of the Hazardous Substances and Packaging (Legislative Functions and Amendment) (EU Exit) Regulations 2020, Table 1 and Table 2 of Schedule A2 are to be read in accordance with those Regulations. . (4) For regulation 34B, substitute— Further use of the UK marking 34B (1) In this regulation— (a) any reference to an Article is a reference to an Article of the Directive; (b) “harmonised standard” has the meaning given to it in Article 3(13). (2) Paragraph (3) applies where, before placing EEE on the market, the manufacturer— (a) ensures the EEE has been designed and manufactured in accordance with the requirements set out in Articles 4 and 7; and (b) ensures that the conformity assessment procedure that applies to the EEE in accordance with Article 7(b) has been carried out. (3) Where this paragraph applies— (a) the requirements of regulation 12(1) are treated as being satisfied in respect of that EEE; (b) regulations 15 and 17(2) and paragraphs 25 and 26 of Schedule 1 and paragraph 6 of Schedule 1A apply to that EEE subject to the modifications in paragraph (6). (4) Paragraph (5) applies where, before placing EEE on the market, the importer ensures that— (a) the conformity assessment procedure that applies to that EEE in accordance with Article 7(b) has been carried out; (b) the manufacturer has drawn up the technical documentation referred to in Article 7(b). (5) Where this paragraph applies— (a) the requirements of regulation 23(b)(i) are treated as being satisfied in respect of that EEE; (b) regulation 27(1)(b) applies to that EEE subject to the modifications in paragraph (6). (6) The modifications referred to in paragraphs (3)(b) and (5)(b) are that— (a) any reference to “designated standard” is to be read as a reference to a harmonised standard; (b) any reference to “technical documentation” is to be read as a reference to the technical documentation referred to in Article 7(b). (7) Nothing in this regulation is to be taken to affect the prohibition in regulation 3(1) on placing, or making available, EEE on the market containing the substances listed in Schedule A1, subject to any exemptions as listed in Table 1 or Table 2 of Schedule A2. (8) Where an exemption continues to apply by virtue of regulations 6(4), 7(3) or (4) or 10(4) of the Hazardous Substances and Packaging (Legislative Functions and Amendment) (EU Exit) Regulations 2020, Table 1 and Table 2 of Schedule A2 are to be read in accordance with those Regulations. .
One line that says what changes, such as "Halve the dog tax".
Who it helps, what it costs, what it fixes. It is what persuades people to support it.
How this law is officially changed
Solon does not know this law's official route yet. The proposal is recorded all the same, and the route appears here once its source is added.
A proposal here is not law. Support on Solon is evidence that people want the change; the official route says what it takes to make it law.
Sign in to file your proposal. What you have written stays on this page.
Sign in to file itThink it through
Ask what your change would do, who would gain and who would bear a cost, and where something like it is already law. The assistant reads your draft as it stands, cites the law and the studies it finds, and takes no side. What you file stays yours.