The Pressure Equipment (Safety) (Amendment) Regulations 2024
Write the words of this act the way you think they should read. Solon shows your change as a redline against the published text and pins it to that exact text, so it can never be applied to wording you did not see.
Change 1
2 Amendment of the Pressure Equipment (Safety) Regulations 2016
(1) The Pressure Equipment (Safety) Regulations 2016, as they apply in relation to England and Wales and Scotland, are amended as follows. (2) In regulation 2(1) (interpretation)— (a) in the definition of “applicant”, for “notified” substitute “approved”; (b) omit the definition of “notified body requirements”; and (c) in the definition of “recognised third party organisation”, for “is” substitute “except in Schedule 2 (essential safety requirements), is”. (3) In regulations 43(1) to (4) and 44 (conformity assessment procedures), for “notified”, in each place it appears, substitute “approved”. (4) In Schedule 2 (essential safety requirements)— (a) for paragraph 21(3), substitute— (3) For pressure equipment, permanent joining of components which contribute to the pressure resistance of equipment and components which are directly attached to them must be carried out by suitably qualified personnel according to suitable operating procedures and for pressure equipment in categories II, III and IV, operating procedures and personnel must be approved by a competent third party which, at the manufacturer's discretion, may be— (a) an approved body; (b) a recognised third party organisation; or (c) a notified body. (3A) In this Schedule— (a) “notified body” means a conformity assessment body which is a notified body for the purposes of the Directive (as provided for in Article 29(5) of the Directive); (b) “recognised third party organisation” means a conformity assessment body— (i) within the meaning set out in regulation 52; or (ii) which is a recognised third party organisation for the purposes of the Directive (as provided for in Article 29(5) of the Directive). ; (b) in paragraph 31(5), for “the approved body in charge of conformity assessment procedures for the pressure equipment” substitute “an approved body or a notified body”; and (c) in paragraph 31(8), for “in the United Kingdom” substitute “in the United Kingdom or in the territory of an EEA state”.
2 Amendment of the Pressure Equipment (Safety) Regulations 2016
(1) The Pressure Equipment (Safety) Regulations 2016, as they apply in relation to England and Wales and Scotland, are amended as follows. (2) In regulation 2(1) (interpretation)— (a) in the definition of “applicant”, for “notified” substitute “approved”; (b) omit the definition of “notified body requirements”; and (c) in the definition of “recognised third party organisation”, for “is” substitute “except in Schedule 2 (essential safety requirements), is”. (3) In regulations 43(1) to (4) and 44 (conformity assessment procedures), for “notified”, in each place it appears, substitute “approved”. (4) In Schedule 2 (essential safety requirements)— (a) for paragraph 21(3), substitute— (3) For pressure equipment, permanent joining of components which contribute to the pressure resistance of equipment and components which are directly attached to them must be carried out by suitably qualified personnel according to suitable operating procedures and for pressure equipment in categories II, III and IV, operating procedures and personnel must be approved by a competent third party which, at the manufacturer's discretion, may be— (a) an approved body; (b) a recognised third party organisation; or (c) a notified body. (3A) In this Schedule— (a) “notified body” means a conformity assessment body which is a notified body for the purposes of the Directive (as provided for in Article 29(5) of the Directive); (b) “recognised third party organisation” means a conformity assessment body— (i) within the meaning set out in regulation 52; or (ii) which is a recognised third party organisation for the purposes of the Directive (as provided for in Article 29(5) of the Directive). ; (b) in paragraph 31(5), for “the approved body in charge of conformity assessment procedures for the pressure equipment” substitute “an approved body or a notified body”; and (c) in paragraph 31(8), for “in the United Kingdom” substitute “in the United Kingdom or in the territory of an EEA state”.
One line that says what changes, such as "Halve the dog tax".
Who it helps, what it costs, what it fixes. It is what persuades people to support it.
How this law is officially changed
Solon does not know this law's official route yet. The proposal is recorded all the same, and the route appears here once its source is added.
A proposal here is not law. Support on Solon is evidence that people want the change; the official route says what it takes to make it law.
Sign in to file your proposal. What you have written stays on this page.
Sign in to file itThink it through
Ask what your change would do, who would gain and who would bear a cost, and where something like it is already law. The assistant reads your draft as it stands, cites the law and the studies it finds, and takes no side. What you file stays yours.