The Electricity and Gas (Energy Company Obligation) Order 2023
Write the words of this act the way you think they should read. Solon shows your change as a redline against the published text and pins it to that exact text, so it can never be applied to wording you did not see.
Change 1
32 Publication of annual cost savings methodology
(1) Before the end of the 6 week period beginning with the commencement date, the Administrator must publish, on its website, a methodology for the purpose of determining the annual cost savings of an ECO4A qualifying action. (2) Under the methodology published by the Administrator— (a) the initial determination of the annual cost savings must be based on— (i) the pre-installation SAP rating of the domestic premises at which the ECO4A qualifying action is installed; and (ii) the impact the ECO4A qualifying action would have on the SAP rating of the domestic premises; (b) the result of the initial determination referred to in sub-paragraph (a) must be reduced by 10% in order to calculate the adjusted cost savings; and (c) the annual cost savings must finally be determined in accordance with the following formula— A K M ± I K M × F . (3) In paragraph (2)(c)— (a) “AKM” is the adjusted cost savings calculated in accordance with paragraph (2)(b); (b) “IKM” is the initial determination of the annual cost savings referred to in paragraph (2)(a); (c) “F” is— (i) 0.2, where the floor area of the domestic premises is less than 73m²; (ii) 0.1, where the floor area of the domestic premises is between 73m² and 97m² (both inclusive); and (iii) 0, where the floor area of the domestic premises is greater than 97m². (4) Before publishing a methodology under this article, the Administrator must have regard to the Standard Assessment Procedure and the Reduced Data Standard Assessment Procedure. (5) On or before 30th June 2026, the Administrator may revise any methodology published under this article by publishing the revised methodology on its website. (5A) This article is subject to article 32A. (6) In this article— “floor area” has the same meaning as in the Standard Assessment Procedure; “pre-installation SAP rating” means the SAP rating which is determined for the domestic premises pursuant to a pre-installation energy efficiency assessment.
32 Publication of annual cost savings methodology
(1) Before the end of the 6 week period beginning with the commencement date, the Administrator must publish, on its website, a methodology for the purpose of determining the annual cost savings of an ECO4A qualifying action. (2) Under the methodology published by the Administrator— (a) the initial determination of the annual cost savings must be based on— (i) the pre-installation SAP rating of the domestic premises at which the ECO4A qualifying action is installed; and (ii) the impact the ECO4A qualifying action would have on the SAP rating of the domestic premises; (b) the result of the initial determination referred to in sub-paragraph (a) must be reduced by 10% in order to calculate the adjusted cost savings; and (c) the annual cost savings must finally be determined in accordance with the following formula— A K M ± I K M × F . (3) In paragraph (2)(c)— (a) “AKM” is the adjusted cost savings calculated in accordance with paragraph (2)(b); (b) “IKM” is the initial determination of the annual cost savings referred to in paragraph (2)(a); (c) “F” is— (i) 0.2, where the floor area of the domestic premises is less than 73m²; (ii) 0.1, where the floor area of the domestic premises is between 73m² and 97m² (both inclusive); and (iii) 0, where the floor area of the domestic premises is greater than 97m². (4) Before publishing a methodology under this article, the Administrator must have regard to the Standard Assessment Procedure and the Reduced Data Standard Assessment Procedure. (5) On or before 30th June 2026, the Administrator may revise any methodology published under this article by publishing the revised methodology on its website. (5A) This article is subject to article 32A. (6) In this article— “floor area” has the same meaning as in the Standard Assessment Procedure; “pre-installation SAP rating” means the SAP rating which is determined for the domestic premises pursuant to a pre-installation energy efficiency assessment.
One line that says what changes, such as "Halve the dog tax".
Who it helps, what it costs, what it fixes. It is what persuades people to support it.
How this law is officially changed
Solon does not know this law's official route yet. The proposal is recorded all the same, and the route appears here once its source is added.
A proposal here is not law. Support on Solon is evidence that people want the change; the official route says what it takes to make it law.
Sign in to file your proposal. What you have written stays on this page.
Sign in to file itThink it through
Ask what your change would do, who would gain and who would bear a cost, and where something like it is already law. The assistant reads your draft as it stands, cites the law and the studies it finds, and takes no side. What you file stays yours.